Please Note: Due to extraordinary circumstances, we may experience small delays in order fulfillment and delivery, but we are working to keep all orders moving as quickly as possible. We appreciate your understanding during this difficult time.
This Is A Working Running Machine
- The following has been completed on the machine as of 11/18/2020.
> Spindle Motor & cooling fins are clean & clear of debris
> Spindle Motor Fan has been cleaned & tested
> Rebuilt spindle transmission High / Low gear rotary actuator
> Replaced transmission shot pin cylinder & sensor assembly
> Installed new transmission main shaft seal sleeve & seal
> Replaced transmission fluid with new synthetic oil
> Replaced spindle motor to transmission gasket
> Replaced X axis left & right ballscrew thrust bearings
> Replaced Z axis top ballscrew thrust bearing & lower support bearing
> Replaced Toolchanger tool count & tool position #1 Prox switch cables
> Replaced Toolchanger carousel rotation motor cable
> Installed new motherboard, backplane, logic power supply & hard drive
> Installed newest Bridgeport software (Version 4.79.22/6.89.57)
> Includes two copies of the Bridgeport operating software system discs
> Rebuilt X, Y & Z Drives
> Rebuilt Z axis Parvex motor & replaced encoder
> Installed new Z axis armature & encoder cable
> Rebuilt Y axis SEM motor
> Rebuilt & upgraded AUF & LCTLAUF boards
> Replaced way cover link aprons on Y & Z axis
> Replaced electrical cabinet air filter
> Installed new spindle tool engagement key
> Replaced chip guard front door window & gasket
> Replaced Waylube metering oilers for Z axis ballscrew & ways
> Replaced Z axis ballscrew Waylube fittings
> Replaced legend plate for Index Carousel & Tool Eject
> Replaced Index Carousel & Tool Eject pushbuttons
> Tested coolant pump with 15 gallon supply tank
> Machine comes with complete set of manuals
> Entire machine has been wiped down.
Further information will be added if any other upgrades are done.
See Photos For Upgrade/Maintenance Records
Date Manufactured: 04/1997
X-Axis Travel - 22"
Y-Axis Travel - 16"
Z-Axis Travel - 20"
Table Size - 45" x 16" (33" x 14" Working Area)
Maximum Table Load - 750 Lbs
Tool Changer - 22 Capacity
Tool Holder - CAT40
ATC Type - Carousel, 22 Pos.
Spindle Taper - 40
Spindle Motor - 7.5 HP
Spindle Speeds - 7500K 2 Speed With Transmission
Low Gear range 25-1825 RPM
High Gear range 1826-7500 RPM
Rapid Traverse Rate - 472 ipm (X+Y-Axis), 300 ipm (Z-Axis)
Approximate Machine Weight - 6,500 Lbs
Approximate Machine Dimensions - 79" LR, 79" FB, 96" H
208/230/460V, 3 Phase, 60 Hz
Flood Coolant Pump - 120 Volts, 1 Phase 50/60Hz, 0.1 HP, 4 GPM Flow, 15 Gallon Tank Capacity
Machine is Equipped With DX-32 CNC Control
RS-232 port which is operational
No Rotary Table is Included in Sale
Serial # 558
Information Will Updated Periodically Regarding This Machine
We Recommend Setting Up Your Own Method of Freight To Pick This Item Up.
We Highly Recommend A Step Deck Or Flat Bed Trailer To Be Used With Air-ride.
We Can Load This Machine Free of Charge !!!
For More Information Please Contact Us @ 203-877-8054 / firstname.lastname@example.org
Click Here To View Our eBay Store
Other fine products
- CNC Machine Parts
- Explorer (Rigid Ram) Parts
- EZ Path/Romi
- EZ Surf Parts
- EZ Trak Parts
- Hardinge Parts
- Machines for Sale
- Series I Standard
- Series II Standard
- V2XT (V-Ram) Parts
- VMC - 2216, 3016, 3020 . Fanuc 21i
- VMC - 760, 800, 1000 DX32
- VMC - 760, 800, 1000 UK
- VMC - TC 1, 2, 3 & 4 DX32
- VMC - TC 1, 2, 3 & 4 Fanuc 0M
- VMC - Torq Cut 22 & 30